
Gateway 500 Lite
43
D. USB does not work
You can try the same method as mentioned earlier with the Gateway Lite BT.
It is essential to check the following:
- USB drive meets the requirements
- file extensions (compression rate is not bigger than 320 kbps)
- the system has to be tested with a different USB drive, with 1-2 music files only
- make sure the files are not write protected (to do so use check the files on a PC)
E. Firmware update
Works the exactly same way as on other devices like Gateway Lite BT or Gateway Pro.
The actual firmware version can be checked if you have the GW_EES.BIN. Just view it using NotePad
(or similar application). If you click on view, you will see the following:
Do not forget:
- file needs to be copied to the root folder on the USB drive
- the drive has at least one playable music content on it
- use a USB drive instead of an HDD
- do not disconnect the USB throughout the update process (max. 2 minutes)
- do not turn the engine ON while updating (it can be turned ON before or after)
- same firmware version cannot be updated onto the Gateway
Comentarios a estos manuales